There are a large number of ways to configure Ivanti EPM Content Replication to meet a variety of needs. Some examples of how Content Replication can be used are listed below. These are not necessarily in-use in a production environment nor specifically supported by Ivanti They are intended as ideas or starting points to create a Content Replication configuration to meet your needs.
For more information on Content Replication and Preferred servers see: How to use Ivanti EPM Content Replication
Single - Simple Replication
This scenario involves a single Source, Preferred server, and Replicator each configured as a separate device. This could be used when to locations are connected by a decent link, or simply to reduce traffic to the Source.
| Source | Preferred server | Replicator |
|---|---|---|
Physical Path : C:\Storage\ Share name : Storage Share point : C:\Storage\ Source Path : \\Server\Storage Source Representative: Not used | Physical Path : C:\Storage Share name : Storage Share point : C:\Storage Share used by Replicator : \\Server\Storage Share used by clients : \\Server\Storage | Location : Local to the Source or Preferred server. If concerned about bandwidth usage of the link, the Replicator should be located local to the Source |
| Notes : The Storage folder may contain additional folders such as Patch or Software. If that is the case, a single source can be created to replicate both, or separate sources can be created for each folder in the share. | ||
New Scenarios
If you have a Scenario that you have used and would like to share, please send me a private message with details and I will try to get it added here.